Pipeline Type High Shear Dispersing Emulsifier , High Shear Emulsifying Machine 

Pipeline Type stainless steel 316L high shear dispersing emulsifier pump

Product Introduction

Single stage Inline High Shear Mixer is a continuous production type emulsifier with high efficiency. It processed materials in continuous production or circulation of fine materials. The motor drives the rotor to rotate at high speed. Suitable for less than 10000cps high viscosity fluids low emulsification and homogenization, such as aqueous oil-based ink, industrial paint and wood, all kinds of pastes, pesticide suspensions, asphalt, fruit jam, pulp, lubricants, creams, lipsticks, milk products, textile.

Material viscosity: <=50,000 cps

Production Capacity: 1000L-80000L/hour

Applied materials: suitable for emulsifying, homogenizing and dispersing materials in industries, such as biology, pharmacy, food, cosmetic, ink and pesticides etc.

Pipeline High Shearing-rate Emulsifying Machine and Equipment

Emulsifying machine has head-end suction port, top discharging port and horizontal cantilever structure.

Sealing: mechanical seal with lower leakage and longer service life. Single end-face or twin end-face mechanical seal as choice according to different application, and the twin end-face mechanical seal can be connected to clean tap water directly.

Characteristics: Higher shearing force, faster emulsifying procedure, smaller distribution of particle sizes and better emulsifying stability.

Application of pipelined high shear emulsion pump:

Inline high shear mixer is usually installed in the bottom of the reactor or pipeline, the material go through form inlet to outlet, after high-speed shear.

This process could be done continuously or in circulation.

Applications: Emulsifying (Liquid to liquid), suspending (solid to liquid), aerosol making (gas to liquid) and homogenizing painting, oil paint, food, coating material, metal- oxide suspension and water-in-oil or oil-in-water emulsion manufacturing, accelerating reaction speed, improving activator productivity, chemical products producing.

Working Principle:

Pipeline high shearing-rate emulsifying machine has one group, two groups or three groups of stators and rotors in the working cavity. The machine has head-end suction port, top discharging port and horizontal cantilever structure. very stage has 2 to 6 layers which consist of one group, two groups or three groups of stators and rotors.

The connection between motor and working head is flexible coupling. The shaft can be lubricated by grease or oil. It is easy to dismantle and assemble the machine and cost little for replacement of parts. Twin end-face mechanical seal is adopted. Interlayer is available outside the working cavity for the purpose of cooling or heating.