Stainless Steel 316L High Shear Emulsifying Pump Clamp Connection 220V/380V

Pipeline Type stainless steel 316L High Shear Emulsifying Pump

Advantages:

High processing capacity, suitable for industrial continuous production

Smaller distribution of particle sizes and higher evenness

Time-saving, energy-saving and high efficiency

Low noise and stable running

Eliminating the differences between the batch production

No dead corner, material by 100% dispensed and sheared

With the function of short distance and low lift transportation, availability for circular process

Easy operation and simple maintenance

Availability for automatic control

Pipeline High Shearing-rate Emulsifying Machine and Equipment

Emulsifying machine has head-end suction port, top discharging port and horizontal cantilever structure.

Sealing: mechanical seal with lower leakage and longer service life. Single end-face or twin end-face mechanical seal as choice according to different application, and the twin end-face mechanical seal can be connected to clean tap water directly.

Characteristics: Higher shearing force, faster emulsifying procedure, smaller distribution of particle sizes and better emulsifying stability.

Application of pipelined high shear emulsion pump:

Inline high shear mixer is usually installed in the bottom of the reactor or pipeline, the material go through form inlet to outlet, after high-speed shear.

This process could be done continuously or in circulation.

Applications: Emulsifying (Liquid to liquid), suspending (solid to liquid), aerosol making (gas to liquid) and homogenizing painting, oil paint, food, coating material, metal- oxide suspension and water-in-oil or oil-in-water emulsion manufacturing, accelerating reaction speed, improving activator productivity, chemical products producing.

Working Principle:

Pipeline high shearing-rate emulsifying machine has one group, two groups or three groups of stators and rotors in the working cavity. The machine has head-end suction port, top discharging port and horizontal cantilever structure. very stage has 2 to 6 layers which consist of one group, two groups or three groups of stators and rotors.

The connection between motor and working head is flexible coupling. The shaft can be lubricated by grease or oil. It is easy to dismantle and assemble the machine and cost little for replacement of parts. Twin end-face mechanical seal is adopted. Interlayer is available outside the working cavity for the purpose of cooling or heating.