Hair Conditioner Vacuum Emulsifying Mixer Steam Heating SS316L Water Ring Type Pump

Vacuum Emulsifying mixer

Product description

Vacuum system

1 Liquid ring vacuum pump is equipped with solenoid control valve at the water entrance.

2 Vacuum gauge indicates the vacuum in the container.

The vacuity may be set by using the vacuum gauge with max. value and min. value.

3 Vacuum safety switch is designed to keep the upper cover from opening at the state of vacuum.

4 Airtightness of upper cover is ensured by the silicon filling material on the flange.

5 Theoretically, max. vacuity is 730 mm/Hg at 20℃. In order to get optimal emulsifying result, air mustn’t enter into the material. For the process under vacuum condition, you’re allowed to add liquid or powder to the container directly.

· Capacity:500L
· Material: material contact part SS316L, material non-contact part SS304.
· Customized service: to provide and design total solution as per customer URS

Vacuum Emulsifying Machine including:
· Vacuum emulsifying main machine
· Pre-mixing tank for water and oil material
· Vacuum system
· Hydraulic system
· Control system
· Platform made from SS304

Vacuum emulsifying main machine:
· Slow mixer 10-40rpm with PTFE scraper
· Homogenizer 1150-3500rpm (rotor and stator can adjust space)
· Heating by steam or electricity
· Pressure: chamber-0.09Mpa to 0.1Mpa, jacket 0.3Mpa for steam (standard type)
· Upper cover lifting by hydraulic
· Safety limit switch for safety operation
· Upper cover connection: Liquid feed inlet with stainless steel pipe filter, solid material inlet, vacuum inlet, compressed air inlet, breaking vacuum inlet, sight glass, CIP cleaning head, discharging port, dustproof respirator.

Water and oil pre-mixing tank
· High shear mixer 960rpm or slow mixer 60rpm
· Heating by steam or electricity
· Pipeline for material transfer to main emulsifying machine

Vacuum system:
· Water ring type vacuum pump or oil type vacuum pump
· Safety valve for protecting the Water ring type vacuum pump

After finish one batch, customer can choose positive pressure or rotor pump for material out.